IP65 LED Garden light 80w garden lighting Park garden lamp

Lamp Luminous Efficiency(lm/w): 80 Power: 30W/40W/50W/60W/80W/120W/150W Color Rendering Index(Ra): 70 Support Dimmer: Yes Input Voltage(V): AC 85-265V CRI (Ra>): 70

Products Details

Remove the stainless steel presser from the support bar

Attach the two support rods to the circular joint (M6*20MM)

Install the support rod assembly installed in the previous step on the circular lamp

The finished effect is shown in the picture above

Hold the wire with a stainless steel sheet

Cover the middle joint with a circular cover

Electrical Characteristics Input Voltage: AC100-240V 50/60Hz PF: >0.9 Power Efficiency: ≧0.90• IP66 waterproof/dust proof/explosion proof/IK09. • Aluminum shape good at heat dissipation. It can also be installed vertically • Philips SMD 3030 Ra>70/SDCM<6 • 100,000 times switching cycle before failure • Total harmonic distortion(THD)<10% • Excellent post light control design, the whole lamp can achieve T II-M, T III-M,That's our advantage • Pass 3G vibration testIt is mainly applied to branch road, factory, school, garden, various residential communities and courtyards. The installation height is 4-8m and the installation torque is 16Nm.
Model NO. Size L(mm) Size W(mm) Size H(mm) Support pole diameter
T07 450 450 523.5 76/60
Model NO. Power(W) Light Source LED QTY (PCS) Lens(PCS) CCT(K) Lumen(km/h) CRI
T07-30W 30 3030 64 4 4000k 130 >70
T07-40W 40 3030 64 4 4000k 130 >70
T07-50W 50 3030 64/96 4/6 4000k 120/135 >70
T07-60W 60 5050 96 6 4000k 130 >70
T07-80W 80 3030 108 9 4000k 130 >70
T07-100W 100 3030 144 9 4000k 130 >70
T07-120W 120 3030 144 9 4000k 130 >70
T07-150W 150 3030 216 9 4000k 130 >70
Item Symbol specification/Data
Color Index CRI Ra>70
Luminous Efficacy lm/W 120--140 lm/W
Energy efficiency Class / A++
Color consistency in level / Max.6SDCM
THD / <15%
Starting Time S <0.5S
Switching cycle before failure / >100,000times
Premature failure rate@1000h / 0
Lifespan H >50000Hrs
Installing steps Turn off the power before installing. Make sure the model, rated voltage and wattage are the same with the design parameters. Check the wire specification, Connect the wire, Through the waterproof connector, connect the L/N wire of the street lamp to L/N wire of the city electricity. 1. Put the light into the light stem. 2. Fix the screw of handle. 3. Check the installing of the light whether level or not . 4. Adjust the angle into which needed 5. Check the the handle screw fixed or not, if loose, should make it tightly, torque is 16NMThis specification is for reference only,we reserve the right to change without notice.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours